The Sinclair QL Forum

Good luck with the display... they seem to use varying panels.
By the way, I noticed the QL-typical white/red transitions looked sharper from VGA signal than from HDMI.

Hi,

I wonder if the video signal comming out of the VGA socket on thd Q60 board could be fed into a dedicated video processing circuit to changed the required sync signsls of the Q60 into the required signals for a modetn VGA monitor.

Which assume is what the OSSC does.

ones' complement wrote: ↑Thu Apr 11, 2024 12:49 pm

XorA wrote: ↑Thu Apr 11, 2024 12:35 pm

It has been said that OSSC converters can provide that, if they are well tuned. But one has to be careful about the various variants.
Also I find them clumsy and expensive.

I have tried OSSC and gbs-control on Q60 and I could not find a setting on either that would successfully display the full Q60 screen!

Thierry's settings appear to give full Q60 display http://qdos.free.fr/monitors.html (see http://qdos.free.fr/files/OSSC.txt)

Magic, that led me to the set of options I had missed \o/

Slightly different numbers on some settings, but I now have a nice clear complete Q60 screen!