SCART cable for QL

[Mr_Navigator]

At the same time, you need to acquire a 5v DC supply capable of delivering 1A. This does not come with the board, but you will need it.

Good, I have that already

[XorA]

Many thanks Mark, that reply was very useful, I will now investigate the GBS8220 RGB->VGA system which on eBay is available from a variety of sources.

You may need 2/3 there seems to be a pretty high variation on them. I have two, a v4 and a v5, the v4 will happily lock to monitor mode, the v5 not so happy. But from what I've heard the version makes little difference on the capability to lock to strange signals.

[dilwyn]

On Dilwyn's Documentation page there is a section on monitors designed specifically for the QL, the only one to have a circuit diagram is the "SINCLAIR VISION-QL MONITOR MANUAL"
Its in two halves, and two different levels of quality, tone and colour.
I've joined them together, corrected the colouring, tone and contrast as best as possible to get a reasonable full circuit diagram (enclosed is a lower resolution one, Dilwyn if you want the highest resolution image let me know but keep the two halves you currently have)

Yes please - can you send it to my usual personal email address. Thanks.

[dilwyn]

There is the microvetic cub service manual - http://www.arcade-museum.com/manuals-mo ... splays.pdf - not sure if there are any differences to this one for the QL version...

That seems to be the same as the one on my website http://www.dilwyn.me.uk/docs/manuals/index.html - not sure where mine came from now!