QL on the Raspberry Pi...?
- Sparrowhawk
- Super Gold Card
- Posts: 663
- Joined: Wed Dec 15, 2010 12:33 pm
- Location: @131072
- Contact:
Re: QL on the Raspberry Pi...?
Great stuff - now have issues with no existent paths, so it's reading the ini file correctly. I'll get those sorted over the weekend (should be working right now!)
Many thanks for your help
Many thanks for your help
a.k.a. Jean-Yves
- Sparrowhawk
- Super Gold Card
- Posts: 663
- Joined: Wed Dec 15, 2010 12:33 pm
- Location: @131072
- Contact:
Re: QL on the Raspberry Pi...?
Success!
1. How d I set the display to be 2x default (is that possible?)
2. Is there a way to swap mdv images while the emulator is running?
3. Just checking I have the latest version, as the runtime output says the version is 2018? I downloaded the source code from github - I assume latest is there?
Thanks again,
JY
I have a few more questions if you do not mind XorA:1. How d I set the display to be 2x default (is that possible?)
2. Is there a way to swap mdv images while the emulator is running?
3. Just checking I have the latest version, as the runtime output says the version is 2018? I downloaded the source code from github - I assume latest is there?
Thanks again,
JY
a.k.a. Jean-Yves
- Sparrowhawk
- Super Gold Card
- Posts: 663
- Joined: Wed Dec 15, 2010 12:33 pm
- Location: @131072
- Contact:
Re: QL on the Raspberry Pi...?
I also now have SMSQmulator (Java 11 version) running. Very, very nice indeed.
a.k.a. Jean-Yves
- XorA
- Site Admin
- Posts: 1382
- Joined: Thu Jun 02, 2011 11:31 am
- Location: Shotts, North Lanarkshire, Scotland, UK
Re: QL on the Raspberry Pi...?
1. At the moment the window is dynamically resized I took out the zoom option as it was interfering with hidpi displays.Sparrowhawk wrote:Success!
sqlux.png sqlux2.png
I have a few more questions if you do not mind XorA:
1. How d I set the display to be 2x default (is that possible?)
2. Is there a way to swap mdv images while the emulator is running?
3. Just checking I have the latest version, as the runtime output says the version is 2018? I downloaded the source code from github - I assume latest is there?
Thanks again,
JY
2. No
3. Yes, I’ll update that when I actually have it release ready.
- Sparrowhawk
- Super Gold Card
- Posts: 663
- Joined: Wed Dec 15, 2010 12:33 pm
- Location: @131072
- Contact:
Re: QL on the Raspberry Pi...?
Hi,
Apologies, not my thread, but following discussion..
Wishing to catch up with recent sQLux development, thanks Graemme!
Realised needed two packages
I cannot run sQLux using existing config ~/.uqlxrc nor local sqlux.ini
While `uQLx' [uqlx-fork] picks it and runs normally.
Something not up to standard here, possibly.
S-O-S, many thanks.
Apologies, not my thread, but following discussion..
Wishing to catch up with recent sQLux development, thanks Graemme!
Realised needed two packages
Code: Select all
libsdl2-dev
libsld2-net-dev
While `uQLx' [uqlx-fork] picks it and runs normally.
Something not up to standard here, possibly.
S-O-S, many thanks.
Code: Select all
pi@raspberrypi:/usr/src/sQLux/build $ Using Config: ~/.uqlxrc
*** QL Emulator v0.50 ***
release 2018-10-28
Warning: could not find ROM image : No such file or directory
- rom name /usr/local/lib/uqlx/romdir/tk2_ext
Could not find expansion rom, exiting
- XorA
- Site Admin
- Posts: 1382
- Joined: Thu Jun 02, 2011 11:31 am
- Location: Shotts, North Lanarkshire, Scotland, UK
Re: QL on the Raspberry Pi...?
Can you post the uqlxrc too?tcat wrote:Hi,
Apologies, not my thread, but following discussion..
Wishing to catch up with recent sQLux development, thanks Graemme!
Realised needed two packagesI cannot run sQLux using existing config ~/.uqlxrc nor local sqlux.iniCode: Select all
libsdl2-dev libsld2-net-dev
While `uQLx' [uqlx-fork] picks it and runs normally.
Something not up to standard here, possibly.
S-O-S, many thanks.
Code: Select all
pi@raspberrypi:/usr/src/sQLux/build $ Using Config: ~/.uqlxrc *** QL Emulator v0.50 *** release 2018-10-28 Warning: could not find ROM image : No such file or directory - rom name /usr/local/lib/uqlx/romdir/tk2_ext Could not find expansion rom, exiting
Re: QL on the Raspberry Pi...?
Here we go...
Code: Select all
ROMDIR = /usr/local/lib/uqlx/romdir
#SYSROM = minerva_rom
#SYSROM = min198_rom
SYSROM = js_rom
ROMIM = tk2_ext,0xc000
RAMTOP = 512
COLOUR = 1
REAL_WHITE = 1
FAST_START = 1
KEY_ON = 0
#XKEY_ON = 1
DO_GRAB = 1
PRINT = lpr
CPU_HOG = 0
#XKEY_ALT = Mode_switch # use this to have AltGr as QDOS altkey
DEVICE = MDV1,/home/pi/mdv1/,qdos-like
DEVICE = MDV2,/home/pi/mdv2/,qdos-like
DEVICE = WIN1,/home/pi/,qdos-like
DEVICE = WIN2,/home/pi/,qdos-like
#DEVICE = FLP1,/dev/fd0,qdos-fs
DEVICE = RAM1,/tmp/.ram1-%x,clean,qdos-like
DEVICE = RAM2,/tmp/.ram2-%x,clean,qdos-like
DEVICE = RAM3,/tmp/.ram3-%x,clean,qdos-like
#DEVICE = RAM8,/tmp/.ram8-%x,clean,qdos-like
SER1 = /dev/ttyUSB0
SER2 = /dev/ttyUSB1
- XorA
- Site Admin
- Posts: 1382
- Joined: Thu Jun 02, 2011 11:31 am
- Location: Shotts, North Lanarkshire, Scotland, UK
Re: QL on the Raspberry Pi...?
So I took out the load address on sQLux as it never worked on uQlx anyway.
Why it’s not printing that as part of the rom name is puzzling me. I’ll have to check later when on a computer.
Why it’s not printing that as part of the rom name is puzzling me. I’ll have to check later when on a computer.
Re: QL on the Raspberry Pi...?
Ah, actually removing the load address, did it!So I took out the load address on sQLux as it never worked on uQlx anyway.
Works.
Thanks
Last edited by tcat on Sun Feb 28, 2021 1:44 pm, edited 2 times in total.