Q68 Crashes
-
- Font of All Knowledge
- Posts: 3975
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Q68 Crashes
Hi,
Coild you try another edtor to see if it is QD ar fault.
Also maybe try the same same setup on a different computer with the same SMSQ/E configuration, this would check if the Q68 or SMSQ/E is causing the problem.
idententally, I use Sernet 2.22, maybe try looking at that, as there maybe a device driver problem.
Coild you try another edtor to see if it is QD ar fault.
Also maybe try the same same setup on a different computer with the same SMSQ/E configuration, this would check if the Q68 or SMSQ/E is causing the problem.
idententally, I use Sernet 2.22, maybe try looking at that, as there maybe a device driver problem.
Regards,
Derek
Derek
Re: Q68 Crashes
I am using QD B.05. Need to see If I have B.01 somewhere.pjw wrote
Since I reverted to QD V B.01 I havent had any problems (other than the "creeping last line" problem, which never seems to go away).
I can certainly try this.derek_Stewart wrote
maybe try the same same setup on a different computer with the same SMSQ/E configuration,
I did try QMON this afternoon. I got the same crash - memory corruption towards the end of the afternoon but QMON did not warn of it.
Cheers
Re: Q68 Crashes
Even if it appears to work elsewhere, that does not necessarily mean the Q68 is at fault. Different machines have different memory layouts and initialization patterns.Derek_Stewart wrote:Also maybe try the same same setup on a different computer with the same SMSQ/E configuration, this would check if the Q68 or SMSQ/E is causing the problem
It has happened before that the same software appeared okay on QPC, but not on Q68. In the end it was a software bug that could be fixed.
-
- Font of All Knowledge
- Posts: 3975
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Q68 Crashes
Hi,
I was only trying to narrow down the source of system crash.
I have no doubt that Q68!hardware is perfect. More than likely it is the operating system or QD that is at fault.
I would try to use a different editor, but there is no documented way to access the QD/SBAS Thing from something like Microemacs or QED.
I was only trying to narrow down the source of system crash.
I have no doubt that Q68!hardware is perfect. More than likely it is the operating system or QD that is at fault.
I would try to use a different editor, but there is no documented way to access the QD/SBAS Thing from something like Microemacs or QED.
Regards,
Derek
Derek
- mk79
- QL Wafer Drive
- Posts: 1349
- Joined: Sun Feb 02, 2014 10:54 am
- Location: Esslingen/Germany
- Contact:
Re: Q68 Crashes
I often use 10-20 QD vB.05 in parallel, not a single crash. I don't usually use the SBAS thing, so it might be related to that.
Re: Q68 Crashes
Yeah sorry, Marcel. I gave up on B.05 a long time ago in QPC2, as it kept crashing. I did some systematic testing when B05 came out, but didnt find an answer. Working my way down I ended up with B.01, which has been rock stable. Recently I reinstated B.05 again for some reason, but when I tested it with Q68 it crashed the system quite quickly. I use SBAS/QD, but I also have lots of other weird stuff on my machine, so dont know exactly where the problem could be.
Per
dont be happy. worry
- ?
dont be happy. worry
- ?
Re: Q68 Crashes
The last line always seems to be a common problem. ED has that for years, even I had this with my editor in the early versions. .pjw wrote:....other than the "creeping last line" problem, which never seems to go away
4E75 7000
Re: Q68 Crashes
I have been running QD B.01 since this morning while working on the same SBasic program with the SBAS/QD thing in play and there has not been any crashing or other untoward events. So I am now hopeful that Per is correct and that QD B.05 and the SBAS thing and the Q68 version of smsq/e was the problem. Fingers crossed.
Cheers
Cheers
Re: Q68 Crashes
Wierd.Artificer wrote:I have been running QD B.01 since this morning while working on the same SBasic program with the SBAS/QD thing in play and there has not been any crashing or other untoward events. So I am now hopeful that Per is correct and that QD B.05 and the SBAS thing and the Q68 version of smsq/e was the problem. Fingers crossed.
I used QD B.01 and SBAS/QD a lot in QPC2, many QD's open at the same time, seldom any crashes.
There were occasions where QD would no longer respond to the CTRL commands so I had to save my work and restart QPC2.
One indication for trouble was in the Search menu. If the Replace window showed strange characters it was time for a reset.
It has not been a problem with B.05 so far. Never seen the "last line" problem either.
I guess it's some Boot extension causing a conflict, as each of our Boot files is probably unique.
BSJR