I followed the instructions that are attached to the file, but I'm doing something wrong.
Still can not attach any images.
See picture
Short description for Qemulator:
Attention! Works under 32bit Windows only.
1. Install Qemulator
2. Unpack Extension.zip to the qemulator folder - it should then look like this:
Program Files
Qemulator
Extension
QL_BDI.BIN
SD_Card.dll
3. BDI_RAM_Driver: unpack where you want
4. Start Qemulator an then stop it - increase the RAM in the settings to 384KB
5. Start Qemulator
6. Mount one of the slots with the directory where you have unpacked the BDI_RAM_Driver
7. Load the driver (for example: if the directory containing the BDI_RAM_Driver is connected to slot 4):
lrespr mdv4_BDI_bin
checking with:
dir sdc1_
How to work from CF card from QL in Q-emuLator?
Re: How to work from CF card from QL in Q-emuLator?
Sinclair QL + SGC, Sinclair QL+QL-SD.
Excuse my English, I use google translator
Excuse my English, I use google translator
-
- Font of All Knowledge
- Posts: 3957
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: How to work from CF card from QL in Q-emuLator?
Hi,
I have my copy of the registered version of Q-emulator in a directory called QEM
I copied SD_Card.dll and QL_BDI.BIN to the Extensions directory
The BDI_BIN ram driver was unpacked to the QEM folder.
Attached QEM directory to MDV4_ slot
LRESPR MDV4_BDI_BIN loads and checks the QL_BDI.BIN file in the Extensions folder.
I have my copy of the registered version of Q-emulator in a directory called QEM
I copied SD_Card.dll and QL_BDI.BIN to the Extensions directory
The BDI_BIN ram driver was unpacked to the QEM folder.
Attached QEM directory to MDV4_ slot
LRESPR MDV4_BDI_BIN loads and checks the QL_BDI.BIN file in the Extensions folder.
Regards,
Derek
Derek
Re: How to work from CF card from QL in Q-emuLator?
thank you for your help, it's working for me
Sinclair QL + SGC, Sinclair QL+QL-SD.
Excuse my English, I use google translator
Excuse my English, I use google translator