Problem with making partitions
Re: Problem with making partitions
HI
SanDisk SDCFH-2048
same as Dave and his works ok.
But maybe it is the CF card. I ordered another one.
SanDisk SDCFH-2048
same as Dave and his works ok.
But maybe it is the CF card. I ordered another one.
Original BBQL 1985, bought my me in Spain with JM ROM
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
-
- RWAP Master
- Posts: 2839
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: Problem with making partitions
There are also a lot of fake SanDisk CF cards and a lot of equipment does not work with the fake cards.
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
- XorA
- Site Admin
- Posts: 1368
- Joined: Thu Jun 02, 2011 11:31 am
- Location: Shotts, North Lanarkshire, Scotland, UK
Re: Problem with making partitions
Yup been burned by fake cards that in reality only have 1//10th the storage claimed and overwrite themselves.RWAP wrote:There are also a lot of fake SanDisk CF cards and a lot of equipment does not work with the fake cards.
Re: Problem with making partitions
Thank you Rich and Xor.
Today I received a 2 gb verbatim card and so far is working well with one partition win1.
I also received a sd to cf type II adapter. Will see if it works.
Amazon.com
Just 5 days from USA to patagonia. Can you believe it!?
Enviado desde mi iPhone utilizando Tapatalk
Today I received a 2 gb verbatim card and so far is working well with one partition win1.
I also received a sd to cf type II adapter. Will see if it works.
Amazon.com
Just 5 days from USA to patagonia. Can you believe it!?
Enviado desde mi iPhone utilizando Tapatalk
Original BBQL 1985, bought my me in Spain with JM ROM
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
Re: Problem with making partitions
Problem continues
Verbatim CF card, win1 partition successfully created.
After QL reset:
Fail to link win1
Fat is wrong.
Verbatim CF card, win1 partition successfully created.
After QL reset:
Fail to link win1
Fat is wrong.
Original BBQL 1985, bought my me in Spain with JM ROM
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
-
- RWAP Master
- Posts: 2839
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: Problem with making partitions
Could it be the size of the partition table?
Have you checked for any bent pins on either the CF card holder (I have had that happen before) or on the QL expansion connector?
Have you checked for any bent pins on either the CF card holder (I have had that happen before) or on the QL expansion connector?
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: Problem with making partitions
Thanks Rich.
Will check for bent pins. Both floppy drives work flawlessly.
I think it might be card geometry as Jose Leandro says in his website. Maybe there is a correct combination of blocks and size of partition
Enviado desde mi iPhone utilizando Tapatalk
Will check for bent pins. Both floppy drives work flawlessly.
I think it might be card geometry as Jose Leandro says in his website. Maybe there is a correct combination of blocks and size of partition
Enviado desde mi iPhone utilizando Tapatalk
Original BBQL 1985, bought my me in Spain with JM ROM
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
-
- Font of All Knowledge
- Posts: 3977
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Problem with making partitions
Hi,
What system are you using?
As the CF card formatted can is not interchangeable, as one uses QubATA on the Tetroid interface based on Qubide 2.02 and the Jose Leandro interface used Qubide v1.56.
I have both interfaces, so can test this out.
I had problems with JM Roms, I had to use Minerva or JS.
If you want, send me the CF Card and I will do some investigation.
What system are you using?
As the CF card formatted can is not interchangeable, as one uses QubATA on the Tetroid interface based on Qubide 2.02 and the Jose Leandro interface used Qubide v1.56.
I have both interfaces, so can test this out.
I had problems with JM Roms, I had to use Minerva or JS.
If you want, send me the CF Card and I will do some investigation.
Regards,
Derek
Derek
Re: Problem with making partitions
Thank you Derek for your kind offer
I use JM rom and maybe that is the issue.
Half of the times it works well and links win1 anthe other half it doesn't. I will look for bent pins as Rich suggested because the TDI was a tight fit in my QL, had to press a little bit.
My final objective is to be able to use the CF card as a bootable hard drive that installs automatically a boot program that enables tk2, maybe initiate a pointer enviroment, etc.
I would like to change my rom to minerva but Dave Park hasn't answered my request for one and I don't know were to get one.
Best regards
Juan
I use JM rom and maybe that is the issue.
Half of the times it works well and links win1 anthe other half it doesn't. I will look for bent pins as Rich suggested because the TDI was a tight fit in my QL, had to press a little bit.
My final objective is to be able to use the CF card as a bootable hard drive that installs automatically a boot program that enables tk2, maybe initiate a pointer enviroment, etc.
I would like to change my rom to minerva but Dave Park hasn't answered my request for one and I don't know were to get one.
Best regards
Juan
Original BBQL 1985, bought my me in Spain with JM ROM
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
Tetroid TDI with CF card, ROM switcher, power regulator, Gold Card clone and Backplane
Uses: teaching my children to program
-
- Font of All Knowledge
- Posts: 3977
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Problem with making partitions
Hi Juan,
I did have problems with JM Roms, JS seems to be better. But Minerva works better.
I will if a Minerva MK1 eprom boatd can be made.
I did have problems with JM Roms, JS seems to be better. But Minerva works better.
I will if a Minerva MK1 eprom boatd can be made.
Regards,
Derek
Derek