Why did Sinclair hate National Semiconductor?

A place to discuss general QL issues.
Post Reply
User avatar
Dave
SandySuperQDave
Posts: 2765
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Why did Sinclair hate National Semiconductor?

Post by Dave »

Screen Shot 2018-01-11 at 1.20.39 AM.png
From the QL Service Manual, it seems Sinclair Research had no love for National Semiconductor.

Is there a backstory to this?


User avatar
XorA
Site Admin
Posts: 1359
Joined: Thu Jun 02, 2011 11:31 am
Location: Shotts, North Lanarkshire, Scotland, UK

Re: Why did Sinclair hate National Semiconductor?

Post by XorA »

Ah crap I have seen this somewhere before (not for QL) but I can't remember where!


User avatar
Pr0f
QL Wafer Drive
Posts: 1298
Joined: Thu Oct 12, 2017 9:54 am

Re: Why did Sinclair hate National Semiconductor?

Post by Pr0f »

I wonder if it was a loading issue, or maybe slew rate ?

Without comparing the data sheets for NAT semi and maybe TI or whoever else also made the LS series of logic, it's hard to say.


User avatar
Zarchos
Trump Card
Posts: 152
Joined: Mon May 08, 2017 11:49 am

Re: Why did Sinclair hate National Semiconductor?

Post by Zarchos »

You'll have to check the various interviews on YT, but I remember Steve Furber or Hermann Hauser (Acorn) explaining
that the Beeb did (or did not) work (only, or no at all) with some NS chips.
And they never understood why. (For the exact same specs compared to equivalent parts from other founders).


Owner of various QLs including accelerated beasts, and also a happy Q68 owner ;)
Now porting SOTB to the Archies, to then port it to the Q68.
https://www.youtube.com/user/Archimedes ... +%28100%25
User avatar
1024MAK
Super Gold Card
Posts: 592
Joined: Sun Dec 11, 2011 1:16 am
Location: Looking forward to summer in Somerset, UK...

Re: Why did Sinclair hate National Semiconductor?

Post by 1024MAK »

They DID NOT hate National Semiconductor.

Every manufacturer of so called standard 74 series logic uses their own internal logic design to fulfill the overall logic function. This means that logically, a 74 series part from any manufacturer should work. However, timing wise, they may not work the same. And any undocumented features or functions may also not be the same (for example, undefined logic states).

Sinclair found that some 74 chips from National Semiconductor did not work the way they wanted them to. Hence the warnings in both the ZX Spectrum and QL service manuals.

But other manufacturers also some chips that were not recommended in some applications.

Mark


:!: Standby alert :!:
“There are four lights!”
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Looking forward to summer in Somerset later in the year :)

QL, Falcon, Atari 520STFM, Atari 1040STE, more PC's than I care to count and an assortment of 8 bit micros (Sinclair and Acorn)(nearly forgot the Psion's)
Silvester
Gold Card
Posts: 436
Joined: Thu Dec 12, 2013 10:14 am
Location: UK

Re: Why did Sinclair hate National Semiconductor?

Post by Silvester »

My old Elektor data book remarks the Hitachi 245 has Schmitt inputs, which make them suitable for noisy signals.


David
Post Reply