Metacomco C rom / development system

Looking for that hard to find item? Post here!
Post Reply
Wimdev
ROM Dongle
Posts: 29
Joined: Fri Feb 28, 2014 4:40 am
Location: Livermore, CA

Metacomco C rom / development system

Post by Wimdev »

Does anyone have a spare Metacomco C rom? I have the manual + software, but cannot find my C Rom. I did eventually find my Metacomco Pascal ROM, but since they were supposed to be together and it has been 25+ years, I'm pretty sure it's gone. The software won't run without the ROM cartridge. So, if anyone wants to unload their C development system, please let me know. Alternatively, if anyone has a working ROM, a copy would at least allow me to run the software under the emulator (assuming there are no copyright issues - I'm not sure).

Willem


RWAP
RWAP Master
Posts: 2834
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

Re: Metacomco C rom / development system

Post by RWAP »

I don't think I have an EPROM.

If you email me (rich AT rwapservices.co.uk) a photo of the manual or original microdrives, I can easily email you a copy of the EPROM contents...


User avatar
tofro
Font of All Knowledge
Posts: 2685
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: Metacomco C rom / development system

Post by tofro »

Willem,

if it's not about personally preserving MCC C for more sentimental reasons but instead practical usage as a compiler, I'd recommend you have a look at C68, which is a far better compiler with much more support for the "modern" QL.

http://homepage.ntlworld.com/itimpi/qdosdown.htm

Regards,
Tobias


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
RWAP
RWAP Master
Posts: 2834
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

Re: Metacomco C rom / development system

Post by RWAP »

I do have both a QL C and a QL Pascal EPROM cartridge here :D


Wimdev
ROM Dongle
Posts: 29
Joined: Fri Feb 28, 2014 4:40 am
Location: Livermore, CA

Re: Metacomco C rom / development system

Post by Wimdev »

It is for purely sentimental reasons. I do have the much more modern C68 compiler. Back in the mid-80s I learned Pascal (for university courses) and C on the QL, so I have a lot of ancient bits and pieces of code I'd like to go over.

Willem


User avatar
tofro
Font of All Knowledge
Posts: 2685
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: Metacomco C rom / development system

Post by tofro »

Suspected that.

I still keep my QL C ROM dongle somewhere myself (unfortunately empty and without the EPROM).

Regards,
Tobias


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
Martin_Head
Aurora
Posts: 847
Joined: Tue Dec 17, 2013 1:17 pm

Re: Metacomco C rom / development system

Post by Martin_Head »

Wimdev wrote:Does anyone have a spare Metacomco C rom?

Willem
I think this is it.
Attachments
QLC3v02_128_bin.zip
Zipped with Winzip
(3.11 KiB) Downloaded 307 times


Wimdev
ROM Dongle
Posts: 29
Joined: Fri Feb 28, 2014 4:40 am
Location: Livermore, CA

Re: Metacomco C rom / development system

Post by Wimdev »

That's indeed the C-rom. It is the same version I got from Rich Mellor. He also sold me an actual rom, so I'm all set. Thank you both - this forum is great!

Willem


User avatar
vanpeebles
Commissario Pebbli
Posts: 2815
Joined: Sat Nov 20, 2010 7:13 pm
Location: North East UK

Re: Metacomco C rom / development system

Post by vanpeebles »

And thank you Willem for the kind comment :)


Post Reply