I have been sorting through my stock and only have a couple of working QLs left now, so I can release a couple of power supplies.
The power supplies are not in great condition, but are both working.
One has a small hole in the end and what looks like a bolt cut off inside the hole (so NO FINGERS WHEN ITS PLUGGED IN).
The other has the inner core wires exposed on the fly lead to the QL (no copper showing).
These would suit someone who wants to just try out the QL, so I am not willing to sell these to someone I know has several QL PSUs already.
Cost £10 plus postage each.
For those who want just the power connector, I have a partial Q-MOD stock (only 2 modules) which does have the power connector built in on a short lead - cost £8 plus postage.
No warranty on these, apart from they will be working on receipt.
QL PSUs
-
- RWAP Master
- Posts: 2838
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
QL PSUs
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
-
- RWAP Master
- Posts: 2838
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: QL PSUs
One of the PSUs has now been sold
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm