Re: Q68 Software SD Card
Posted: Thu Jul 09, 2020 9:45 pm
Hi Chr$,
I downloaded the zipped image file from the link and restored the image to a Sandisk 4Gb SDHC Card with Win32DiskImager on Windows 7.
The Q68 booted up as I configured the image file with all the softwzre in a QWA file setup as WIN1, on a FAT32 partition. A FAT16 partion exists with documention and a process to copy files to the QWA partition.
Note:
The FAT32 partition must be the first partition, this holds the QWA, QLSD container files.
The FAT partition is defined as partition 2 and is accessed from SMSQ/E withe FAT device, i.e. FAT1_
Incidently, the WIN32DiskImager image files can be mounted as an image drive in windows with the addition of software. Linux has this builr in and mounts the image file as a readonly drive.
I downloaded the zipped image file from the link and restored the image to a Sandisk 4Gb SDHC Card with Win32DiskImager on Windows 7.
The Q68 booted up as I configured the image file with all the softwzre in a QWA file setup as WIN1, on a FAT32 partition. A FAT16 partion exists with documention and a process to copy files to the QWA partition.
Note:
The FAT32 partition must be the first partition, this holds the QWA, QLSD container files.
The FAT partition is defined as partition 2 and is accessed from SMSQ/E withe FAT device, i.e. FAT1_
Incidently, the WIN32DiskImager image files can be mounted as an image drive in windows with the addition of software. Linux has this builr in and mounts the image file as a readonly drive.