Q68 - enable FAT16 driver
- Sparrowhawk
- Super Gold Card
- Posts: 651
- Joined: Wed Dec 15, 2010 12:33 pm
- Location: @131072
- Contact:
Q68 - enable FAT16 driver
When not using the supplied SDHC card that comes with the Q68, how do I get the config menu program to run in order to enable the FAT16 driver?
a.k.a. Jean-Yves
-
- Font of All Knowledge
- Posts: 3975
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Q68 - enable FAT16 driver
Hi,
There is a file called Q68_SMSQ.WIN on the SD Card, that is mapped to WIN8
Just
LRUN WIN8_BOOT
and the necessary tools will be loaded to configure SMSQ/E on that SD Card.
If the WIN8 mapping does not exist, then enter
WIN_DRIVE 8,1,"Q68_SMSQ.WIN"
This will map WIN8 to the file "Q68_SMSQ.WIN" on Card 1
There is a file called Q68_SMSQ.WIN on the SD Card, that is mapped to WIN8
Just
LRUN WIN8_BOOT
and the necessary tools will be loaded to configure SMSQ/E on that SD Card.
If the WIN8 mapping does not exist, then enter
WIN_DRIVE 8,1,"Q68_SMSQ.WIN"
This will map WIN8 to the file "Q68_SMSQ.WIN" on Card 1
Regards,
Derek
Derek
- Sparrowhawk
- Super Gold Card
- Posts: 651
- Joined: Wed Dec 15, 2010 12:33 pm
- Location: @131072
- Contact: