Page 1 of 2
*** SOLVED *** pcb drawings for eprom cartridge and 64 rom b
Posted: Mon Sep 17, 2012 5:04 pm
by techy
Hi forum ,
Has anyone the pcb drawings for a ;
- eprom board ( for 1 eprom ) .
- 64kb rom adapterboard ( to use one 48 kb rom in the left rom socket of the mainpcb ) .
techy
Re: pcb drawings for eprom cartridge and 48 rom board
Posted: Mon Sep 17, 2012 9:10 pm
by dex
Re: pcb drawings for eprom cartridge and 48 rom board
Posted: Tue Sep 18, 2012 7:12 pm
by techy
Dex ,
Thank You !!
will someone have a pcb design for that ??
techy
Re: pcb drawings for eprom cartridge and 48 rom board
Posted: Tue Sep 18, 2012 8:04 pm
by dex
No, sorry.
This particular one was realised on universal board.
Re: pcb drawings for eprom cartridge and 48 rom board
Posted: Tue Sep 18, 2012 8:15 pm
by belg4rion67
Hi dear, would you try with this document ?
I hope that is what you want
Re: pcb drawings for eprom cartridge and 48 rom board
Posted: Sun Sep 23, 2012 1:31 pm
by techy
Thanks , Dex , Belg4rion67
i will try my luck with this info (^-^)
anyone with a eprom cartridge pcb layout ???????
techy1111
Re: pcb drawings for eprom cartridge and 48 rom board
Posted: Sun Sep 23, 2012 5:25 pm
by Dave
I have a bunch of Minerva PCBs that do the same thing... I could maybe make some of them up if the right components came my way. I don't have a parts list, so... Not straightforward.
Re: pcb drawings for eprom cartridge and 48 rom board
Posted: Sun Sep 23, 2012 5:29 pm
by RWAP
Dave - we have the drawing for the internal board to plug an
EPROM into one of the QL's ROM sockets (as above) - I think what he is also after, is the
EPROM cartridge PCBs which plug into the ROM port at the back (eg. for Toolkit II).
I have several
EPROM cartridge boards which you can use if you like
£2 each... Some even have cases
Re: *** SOLVED *** pcb drawings for eprom cartridge and 48 r
Posted: Sun Oct 21, 2012 11:01 am
by techy
Thanks everyone for your answers !!
I am waiting for all hardware to arrive ( snailmail ) .
And then testing can begin
techy
Re: *** SOLVED *** pcb drawings for eprom cartridge and 64 r
Posted: Fri Jan 11, 2013 11:21 am
by Derek_Stewart
Hi,
Quite a while back, in a QL Group in Newcastle Upon Tyne, someone developed a modification to the standard Eprom cartridge for the QL. The Mod. allowed a eprom to be mapped to the QL Rom area and the Eprom Port.
The Mod. was only a couple of wire links on the standard eprom module plugged into the QL Eprom Port. I have a drawing somewhere and a working eprom with Minerva + TK2
Will post it soon and do a PCB CAD drawing with Malcom Lear's excellent PCBDESIGN program.
Derek