Serial port control question

Nagging hardware related question? Post here!
User avatar
bwinkel67
QL Wafer Drive
Posts: 1187
Joined: Thu Oct 03, 2019 2:09 am

Re: Serial port control question

Post by bwinkel67 »

There's a website that has tinkered with the CM11A that stats 4800 baud. Also, I have a Hermes installed so that baud rate shouldn't be a problem if it's 9600.

Can the 8049 handle 4800 by itself, esp if there isn't much traffic at that speed since I doubt it's a long stream of bits to send a control signal and get verification.


Silvester
Gold Card
Posts: 436
Joined: Thu Dec 12, 2013 10:14 am
Location: UK

Re: Serial port control question

Post by Silvester »

If you have Hermes you can use P20, P23 and P26 as inputs and/or outputs (see Hermes manual).

(IMHO you'd need to buffer them for output, pins are quasi-bidirectional: low is 300ohm to 0V, weak high is 50Kohm to +5V, strong high is 5Kohm to +5V for 272nS when set)


David
Post Reply