Case for Trump card clone

Nagging hardware related question? Post here!
User avatar
Dave
SandySuperQDave
Posts: 2765
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: Case for Trump card clone

Post by Dave »

If this is the one on Thingiverse, I designed it. Everyone is welcome to use it and modify it any way they see fit.


Derek_Stewart
Font of All Knowledge
Posts: 3928
Joined: Mon Dec 20, 2010 11:40 am
Location: Sunny Runcorn, Cheshire, UK

Re: Case for Trump card clone

Post by Derek_Stewart »

Dave wrote:If this is the one on Thingiverse, I designed it. Everyone is welcome to use it and modify it any way they see fit.
I looked on Thing Universe, can not see the case you are tslking about, can you supply a link.


Regards,

Derek
User avatar
Pr0f
QL Wafer Drive
Posts: 1298
Joined: Thu Oct 12, 2017 9:54 am

Re: Case for Trump card clone

Post by Pr0f »

I vaguely remember seeing one that had a seperate bottom part flat with vents, and through holes in seperate places to allow screwing the top part to it. Does anyone have that design.

I've printed this one on an Ender3Pro - but probably should have done it vertically as the top deformed a little. I was new to 3d printing then ;-)


nikosdoykas
Over Heated PSU
Posts: 134
Joined: Tue Oct 09, 2018 4:20 am

Re: Case for Trump card clone

Post by nikosdoykas »

Dave wrote:If this is the one on Thingiverse, I designed it. Everyone is welcome to use it and modify it any way they see fit.
yes found on think giverse and was for rezin printers assume its your dave...


User avatar
Dave
SandySuperQDave
Posts: 2765
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: Case for Trump card clone

Post by Dave »

It was designed for printing on either a resin printer, or an Ender 3/5. I included the STLs so people could do as they wished. It is 100% based off the original Sinclair design which Sandy, among others, licensed.


nikosdoykas
Over Heated PSU
Posts: 134
Joined: Tue Oct 09, 2018 4:20 am

Re: Case for Trump card clone

Post by nikosdoykas »

thank david


User avatar
bwinkel67
QL Wafer Drive
Posts: 1187
Joined: Thu Oct 03, 2019 2:09 am

Re: Case for Trump card clone

Post by bwinkel67 »



User avatar
Dave
SandySuperQDave
Posts: 2765
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: Case for Trump card clone

Post by Dave »

Yep, that's the one.


Post Reply