Hi Derek,Derek_Stewart wrote:HI George,
I updated the Altera Firmware with the v13.0 SP1 of the programming software, as Rich says, v9.1 software would not work very on my 64 bit Windows 10 Pro machine.
The Eprom is actually a Winbond W27C512 EEPROM, I used a Minipro TL866CS programmer to erase the EEPROM and programme the chip with the supplied ROM image.
See my picture of the system booting up.
Note, if you update the ROM and not the Firmware, the system gives errors relating the the wrong GALS and you have to move Jumpers 3,4,5 to 1,2,3 or the system will not work.
If you have any problems, I can update the firmware and EEPROM.
Thanks for the advice. I should be able to upgrade the firmware and hope the microelectronics team at work can update the EPROM for me.
I'll keep people posted on my progress.
Thanks again,
George,