Q- emulator and prospero fortran

Discussion and advice about emulating the QL on other machines.
Post Reply
mhanias
Brittle Membrane
Posts: 105
Joined: Mon Jul 11, 2011 10:12 pm

Q- emulator and prospero fortran

Post by mhanias »

Had anyone manage to run prospero fortran with its eprom with image of its eprom?
It seems that after a point the emulator doesn't not recognise the rom image


User avatar
tofro
Font of All Knowledge
Posts: 2685
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: Q- emulator and prospero fortran

Post by tofro »

I tried, with no success, on QPC. The first compilation will apparently work, but the compilation seems to be writing to the EPROM area and messes up the ROM.

This is not the case with Prospero Pascal that uses the same ROM.

Tobias


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
mhanias
Brittle Membrane
Posts: 105
Joined: Mon Jul 11, 2011 10:12 pm

Re: Q- emulator and prospero fortran

Post by mhanias »

Exactly the same happens with fortran Also in real QL with eprom 1.3 and the same happens


mhanias
Brittle Membrane
Posts: 105
Joined: Mon Jul 11, 2011 10:12 pm

Re: Q- emulator and prospero fortran

Post by mhanias »

Exactly the same happens with fortran Also in real QL with eprom 1.3 and the same happens


User avatar
tofro
Font of All Knowledge
Posts: 2685
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: Q- emulator and prospero fortran

Post by tofro »

mhanias wrote:Also in real QL with eprom 1.3 and the same happens
Are you really talking about "eprom in an EPROM"?. On a real QL, the code shouldn't be able to change EPROM contents. On QPC, I could observe the contents of the ROM memory area had changed after the first compilation run.

Tobias


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
mhanias
Brittle Membrane
Posts: 105
Joined: Mon Jul 11, 2011 10:12 pm

Re: Q- emulator and prospero fortran

Post by mhanias »

A physical eprom with Prospero Fortran 1.3 but software is version 1.51


Post Reply