Hi,
I down downloaded a recent copy for RPI-OS and restored it with Linux Image Writer (Disks), this gave a bootable RPI SD Card.
Inserted the 8Gb SD Card into the RPI +3B and booted up OK, used raspi-config to use all the SD Card space.
I updated the Linux operating system and download the file UQLX2017.zip from the QL Homepage.
The file UQLX2017.zip was extracted to /home/pi/uqlx
I copied the file .uqlxrc to /home/pi/ or ~/
edited the ~/uqlxrc file to reflect the location of the QL romdir and opened a new terminal in ~/uqlx and entered the command: ./qm_armv7
See attached screen shot, with minimal uqlx configuration.
- UQLX running on RPI +3B
Next step is to read the manual again and compile a new copy from sources and maybe install a QWA file with more up to date QL software.
I was hoping to use sQLux, but that requires SDL2, which I am not sure is available on the RPI.