The Sinclair QL Forum

Hi Peter, Looks great, fitting nice into the QL Case. I do not need floppy disc drives, SD Cards are much better. Besides, there is no Floppy disk interface hardware, no floppy disc driver software and I doubt there is any one to write the driver software. I use FLP images on an SD Card and use FDI ...

Hi,

Have you any photographs?

... as well as sQLux, Q68 Ummm, no. "Both" in the sense of "byte-swapped" or not. As far as I'm aware this is a QPC-only feature. Nope, I implemented byte swapping in sQLux years ago. I am a little confused, the QUBide files from my QL-SD Interface, are read/write on Q68 using t...

Hi,

Could the 68SEC000 be connected to the QL 68008 socket with an appropriate DIP to QFP adapter board, with the possibility of using it own un-contended ram?

Hi,

I thought every thing was black and white in assembler...

Hi Tom,

Do you have details of the supports under the PCBs?

Pity the Microdrive Pillars could not being used to mount the OqtaDrive PCB.

mk79 wrote:

Peter wrote:SD images can also are byteswapped sometimes, e.g. if SD-IDE converters are used with native hardware. Which is not unlikely for some Qubide or even Q40/Q60 setups.

Ah ok. Unlikely setup on a PC, but I understand. Well, even better that QPC can do both

... as well as sQLux, Q68

HI Marcel,

I loaded 2 QUBide image file that were used on a QL-SD v1 on QPC v5.0.2 with SMSQ/E v3.38 which worked really well.

Excellent work to get this working.

Thanks Tom

I have arrangrd for a sample print of the STL files, see if they can do them as good as your one.

Hi,

If I follow the convert_bas to un-jumble the QEP3 ROM, the eprom data and address lines connection to the QL bus must be determined to produce the un-jumble sequence.