The Sinclair QL Forum

Thank you Martin! I looked onto this a few years ago, but the task was too difficult for me. Does it runs only from normal memory or do you need to use some of the Q68 fast memory ?

François

I don’t think there will be any issues with a 90 degree bend using new membranes. Once installed there will be stresses in the membrane but it will be static stresses. What breaks such membranes is usually fatigue. In other words, install it and leave it alone.

François

Ok I figured out the problem, this is bad news. The aurora_bin file was downloaded from Wolfgang site and went through many steps before ending on my aurora setup hard drive. So I checked the integrity of it along the path… Ok on SMSQmulator i.e. config utility shows all config options Ok on my Q68 ...

Clearly my aurora_bin file was corrupted somehow. I will try again and report.

François

Hi, Today I upgraded my QL computers to the latest SMSQ 3.38. While the upgrade went smoothly on my GoldCard QL and my Q68, it was not the case with my SuperGoldCard + Aurora station. First strange behavior, when I try to configure the Aurora_bin file taken from the official SMSQ site, the config ut...

I couldn’t agree more with your design choices Peter. Although I voted for the plug-in card in an existing QL, the motherboard replacement was not far behind. Looking forward to see the final product… and putting some money aside. François Looking at the survey after it had plenty of time to settle,...

Does this game run at the intended speed on a fast system or do we need to SLUG the computer ?

François

Happens for me with any QPC2 version. But it works once I configure the hash table to some value (I chose -2048). How you configure the hash table? By using the normal config utilities “config” or “menu config” on the file: blackknight_ptr For the hash table, choices are (in kiloBytes) Positive val...

I will install QPC 5.02 and check if I can reproduce the problem.

I will let you know.

François

Would this project also work with Hermes instead of the IPC 8049 ?