Search found 2007 matches

by Peter
Fri Apr 26, 2024 10:33 pm
Forum: Hardware
Topic: Announcing the new "Gold Card" - QIMSI Gold
Replies: 4
Views: 157

Re: Announcing the new "Gold Card" - QIMSI Gold

Derek_Stewart wrote: Fri Apr 26, 2024 10:23 pm I am really fed up I can not attrnd, but I woukd be grateful, if you reserve a QIMDI GOLD for me. The expansion facilities look excellent.
Hi Derek, we will miss you a lot! I will try to reserve one for you.
by Peter
Fri Apr 26, 2024 10:19 pm
Forum: Hardware
Topic: SGC successor brainstorming
Replies: 97
Views: 42305

Re: SGC successor brainstorming

Out of curiosity, two questions: . Will it have a high speed rs-232 output (qimsi style "ser4")? (I believe I understood that yes). Yes. And it has higher throughput now, if used directly with Minerva or SMSQ/E on the accellerated CPU. - If it has video, memory, keyboard/mouse... Will it ...
by Peter
Fri Apr 26, 2024 9:15 pm
Forum: Hardware
Topic: Announcing the new "Gold Card" - QIMSI Gold
Replies: 4
Views: 157

Announcing the new "Gold Card" - QIMSI Gold

Hi folks, would you like to improve your QL with... ... a digital connection to modern displays ? ... 1024 x 768 graphics resolution ? ... 65536 colors ? ... a 40 MHz 68000 compatible CPU running Minerva and SMSQ/E ? ... 32 MB RAM ? ... a buffered realtime clock ? ... a 115200 Baud serial port ? ......
by Peter
Thu Apr 25, 2024 10:34 pm
Forum: Hardware
Topic: FPGA replacment for the ZX8301 ULA and more
Replies: 264
Views: 99731

Re: FPGA replacment for the ZX8301 ULA and more

lliont wrote: Thu Apr 25, 2024 6:07 pm But this I think it is the final version maybe with only minor changes.
Not bad! Almost Gold Card speed which has Q-Top Index 5.127.
by Peter
Wed Apr 24, 2024 10:24 pm
Forum: Hardware
Topic: FPGA replacment for the ZX8301 ULA and more
Replies: 264
Views: 99731

Re: FPGA replacment for the ZX8301 ULA and more

It also needs two wires and a small board over zx8301 socket but it is so much easier to install and no need for 3d printed plate for the ports. One or two wires are not too bad. For QIMSI I also needed one for the QL speaker. I had the luck that one ROM port pin has no dedicated funktion, so the c...
by Peter
Wed Apr 24, 2024 9:40 pm
Forum: Hardware
Topic: SGC successor brainstorming
Replies: 97
Views: 42305

Re: SGC successor brainstorming

Hi folks, it's been a long while since we discussed this, but it was not forgotten... [*]I could completely live without microdrives, with the limited supply of cartridges, there's not much point in them. SD is a perfect replacement [*]No need to have much on-board ROM other than a small loader - Lo...
by Peter
Tue Apr 23, 2024 9:07 pm
Forum: Hardware
Topic: SOLVED ntsc sinclar ql schematics ??
Replies: 15
Views: 411

Re: SOLVED ntsc sinclar ql schematics ??

Okay thanks for the clarification!
by Peter
Tue Apr 23, 2024 8:59 pm
Forum: Software & Programming
Topic: Re: Q68 direct sector access
Replies: 20
Views: 461

Re: Q68 direct sector access

I keep on moaning at Wolfgang that the Q68 Config defaults are not as agreed. His settings are terrible, especially as the WIN8 configuration mechanism won't even work on some cards with the "fast" setting. Also the french keyboard is super weird to get reconfiguration started. And the lo...
by Peter
Tue Apr 23, 2024 1:10 pm
Forum: General QL Chat
Topic: Anouncement for the 40th Anniversary of the Sinclair QL in Dormagen (Germany)
Replies: 29
Views: 2280

Re: Anouncement for the 40th Anniversary of the Sinclair QL in Dormagen (Germany)

martyn_hill wrote: Mon Apr 22, 2024 12:00 pm Just to say that, after careful consideration, I have now gone ahead and booked my flight for the Dormagen QL event in May :-)
Superb! When do you need to travel back? I might even stay on Sunday if some others also can stay.
by Peter
Tue Apr 23, 2024 1:07 pm
Forum: Hardware
Topic: SOLVED ntsc sinclar ql schematics ??
Replies: 15
Views: 411

Re: ntsc sinclar ql schematics ??

Dave wrote: Sun Apr 21, 2024 9:07 pm Exact UK layout no changes.
Not even $ instead of £?
martyn_hill wrote: Sun Apr 21, 2024 9:46 pm To be fair, the UK keyboard was already pretty much based on the US layout - something I was surprised to discover when developing the extra language maps for the Qbase :-)
Did you finish any of them?