The Sinclair QL Forum

Pr0f wrote: ↑Tue May 28, 2024 5:07 pm ah - so the JM and Minerva ROM's are in 2 different QL's ?

Yes

The only possibility I can think if is if your Minverva also has TK2, and the floppy interface is set for the ROM port address... TK2 is disabled on the ROM, but it could be a QIMSI clash in that case. Will test Many thanks Still works in JM QL with QIMSI plugged in, so definitely seems to be Miner...

Pr0f wrote: ↑Tue May 28, 2024 4:13 pm The only possibility I can think if is if your Minverva also has TK2, and the floppy interface is set for the ROM port address...

TK2 is disabled on the ROM, but it could be a QIMSI clash in that case. Will test

Many thanks

I have a MicroP Floppy Controller that works ok on a QL with JM ROM fitted but on my main Minerva 1.98a1 QL it doesn't work Initially I got a load of code coming up behind the Minerva boot screen so I cleaned the connector and now at the boot screen I just start to get random corruption at the very ...

Just wanted to say to everyone going to have a great time!

Hi Daniele,

I now have the capture file (no idea if it's got valid data) and it's 11.3mb (or 10.7mb zipped)

How do you want me to get the file to you please?

Many thanks
Tony

I had a spare mdv cable so I decided to sacrifice it

Tried doing the capture but only got signal on 1 channel

After a bit of testing I’ve found one of the hook cables I was using has no continuity

Will try again this weekend with a different cable

Many thanks

Hi Daniele, I think I have all the Hardware & Software ready to go BUT I can't get the "hooks" to latch onto the MD cable Any thoughts on what else I can do please? Many thanks For outside, you can get some kind of edge connector and connect the probe to it. Or if you are opening your...

Hi Daniele,

I think I have all the Hardware & Software ready to go BUT I can't get the "hooks" to latch onto the MD cable

Any thoughts on what else I can do please?

Many thanks

I now have these items: Not sure if on Mac it's the same, but on Windows often the logic analyzer won't immediately be seen by PulseView (try using fx2lafw type). When that happens, the Zadig utility (comes with PulseView) can be used to install the proper firmware. After that, it should then show ...