who can shine a light on the hoglet rgd to hdmi converter

[techy]

Hi forum ,

So i got only one thing clear , and that is the 2018-2020 version of the main pcb.

components and pcb ordered.

Now ,..................

What adapter board do i need for ;

zx80/81 with cap modified vid. output
spectrum with cap modified vid. output
spectrum 128 with standard vid. output
QL with standard vid. output

So at least the 3/4 level analog board iss 3

But i can not make any more of the explanation on github


can anyone help me out what else i need here ? .......please

[Derek_Stewart]

Hi,

Have aa look on the Stardot Forum, where the RGB2HDMI converter was developed, I a sure there will be more information there and maybe someone that has built the Spectrum and ZX80/81

[ql_freak]

Do your really need a converter to HDMI? If it's enough to have a converter so that you can view the output of a QL, here is the thread for a cheap converter (for QL) to VGA:

https://www.qlforum.co.uk/viewtopic.php ... it=pi+pico

[polka]

Some time ago I posted here :
viewtopic.php?p=47660#p47660
a device to convert SCART to HDMI that I bought to display my QL on a TV that had only HDMI input. it's chinese, indeed !
Bye, POLKa

[techy]

Thanks for all info ,

right now i stop searching , as stardot nor the inventor react to my requests .

[Derek_Stewart]

Some time ago I posted here :
viewtopic.php?p=47660#p47660
a device to convert SCART to HDMI that I bought to display my QL on a TV that had only HDMI input. it's chinese, indeed !
Bye, POLKa

Does it display all the QL screen in monitor mode?

[Derek_Stewart]

Hi forum ,

So i got only one thing clear , and that is the 2018-2020 version of the main pcb.

components and pcb ordered.

Now ,..................

What adapter board do i need for ;

zx80/81 with cap modified vid. output
spectrum with cap modified vid. output
spectrum 128 with standard vid. output
QL with standard vid. output

So at least the 3/4 level analog board iss 3

But i can not make any more of the explanation on github


can anyone help me out what else i need here ? .......please

Try looking at this page, there is wiring suggestions for most machines:
https://github-wiki-see.page/m/IanSB/RG ... iki/Cables

[techy]

Derek thanks for all answers ,

right now i have a working pi + cpld pcb , i have info on my monitor , BUT ......

i thought i need an interface-pcb to connect my fe. ql to .

but in all text regarding this project it says that the new pcb ( i have ) allows a direct connection , but i can not find any nfo regarding that.

so a little problem there .

got the latest firmware running , but now need to verify my soldering as the firmware does not recognise the cpld

[jobdone]

Have you flashed the CPLD? if your CPLD was pre-flashed for testing purposes like some of the ones I purchased , then you may need to cut the Jumpers and use the beta (or was it alpha) version to flash with. Ideally double and triple check your soldering. In regards to what else is needed , just the cable Din Cable from the QL to the hat.

[techy]

too small for my eyes , i can only do that iduring the weekends if my eyes had some rest ( getting older ).

the chip came from a closed reel packaging .