qubata 3.10 what files should be on the formatted ide ??

[techy]

qubata 3.10 what files should be on the formatted ide ??

i can not get it all to work despite hours of searching and reading .

i can not format a cf card with 3.10

WHAT am i doing wrong ??

- cf card does work under 1.56a , so it must be my not-knowledge of 3.10 .

can some one drop me an image of a working cf card ?

i found some info ;

can someone indicate to me where to download those files

[Derek_Stewart]

Hi,

To create a QubATA 3.10 WIN drive, do:

WIN_FORMAT 3,4: REMark format quickly

WIN_DISK "INIT",1 : REMark Initial partition table

REMark Setup partitions, on device 1, partition 1, 256Mb in size
WIN_DISK "CREATE",1,1,256

WIN_DRIVE 1,1,1 : REMark link in WIN1_ from device 1,Partition 1

WIN_FORMAT 0 : REMark reset protection after format

When WIN drive is mounted with the WIN_DRIVE command, there will be no files on the drive.

The files details on screen shot, try looking on the QL Homepage.

[techy]

Derek ,

Works !!

now to get the 4 software packages running .....................