OqtaDrive
Re: OqtaDrive
That cut trace is fine - It's part of the Sinclair-recommended issue 5 board modifications, you can find those in the QL service manual pages C1 and following.
ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
-
martyn_hill
- Aurora
- Posts: 933
- Joined: Sat Oct 25, 2014 9:53 am
Re: OqtaDrive
Hi there!
Yes, that cut trace is a std factory mod on the earlier issue boards. You'll note a couple of passive components are also soldered retrospectively to the underside of the board that complete that mod.
Martyn.
Yes, that cut trace is a std factory mod on the earlier issue boards. You'll note a couple of passive components are also soldered retrospectively to the underside of the board that complete that mod.
Martyn.
Re: OqtaDrive
OqtaDrive 0.7.0 is available. Biggest addition in this release is support for Sinclair Network over the Internet, for transparently connecting Spectrums and QLs over the Internet using the Sinclair Network protocol.