Just re-read the manual and noticed the extended rom slot that I missed before, Ill have to dig in my spares for a suitable connector but that should be simple to construct.Pr0f wrote:I wonder if the Aurora can be used to provide the ROM port?
Aurora Minerva Boot Error
- XorA
- Site Admin
- Posts: 1381
- Joined: Thu Jun 02, 2011 11:31 am
- Location: Shotts, North Lanarkshire, Scotland, UK
Re: Aurora Minerva Boot Error
-
- Font of All Knowledge
- Posts: 4029
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Aurora Minerva Boot Error
Qubbesoft used to supply a IDC cable to enable normal QL Roms to be attached to the Aurora enhanced Rom Port.XorA wrote:Just re-read the manual and noticed the extended rom slot that I missed before, Ill have to dig in my spares for a suitable connector but that should be simple to construct.Pr0f wrote:I wonder if the Aurora can be used to provide the ROM port?
I did have one of these a while back and might even of made one. It is just a matter of connecting the QL Rom port ccnnections, see the Aurora manual.
Or is that something I could make?
I was also thinking about more Aurora boards, but I thought Tetroid was looking into this, is there are interest?
Regards,
Derek
Derek
- XorA
- Site Admin
- Posts: 1381
- Joined: Thu Jun 02, 2011 11:31 am
- Location: Shotts, North Lanarkshire, Scotland, UK
Re: Aurora Minerva Boot Error
The last I heard 2nd hand was Tetroid couldn't extract the code from one of the chips. But I don't have any details!Derek_Stewart wrote:Qubbesoft used to supply a IDC cable to enable normal QL Roms to be attached to the Aurora enhanced Rom Port.XorA wrote:Just re-read the manual and noticed the extended rom slot that I missed before, Ill have to dig in my spares for a suitable connector but that should be simple to construct.Pr0f wrote:I wonder if the Aurora can be used to provide the ROM port?
I did have one of these a while back and might even of made one. It is just a matter of connecting the QL Rom port ccnnections, see the Aurora manual.
Or is that something I could make?
I was also thinking about more Aurora boards, but I thought Tetroid was looking into this, is there are interest?
Re: Aurora Minerva Boot Error
Here's one that someone (sorry, forgot who) made for my Aurora once.XorA wrote:Just re-read the manual and noticed the extended rom slot that I missed before, Ill have to dig in my spares for a suitable connector but that should be simple to construct.Pr0f wrote:I wonder if the Aurora can be used to provide the ROM port?
It's right angled. Hard to see, but the QL EPROM slot part doesn't have a real "key", it's either a wire soldered in at the appropriate place or just a blob of solder to ensure you don't plug something in upside down.
The MPlane backplane has an extended ROM port which is often easier to use as this tends to bend over some internal cables which tend to get in the way.
--
All things QL - https://dilwyn.qlforum.co.uk/index.html
All things QL - https://dilwyn.qlforum.co.uk/index.html