Hello my fellow QL’ers
Anybody out there who had tried the Syquest with the QubATA? I have tried but the QubATA can’t or won’t recognize the drive. I would be very happy with some response.
Happy QLing
Klaus
Qubata Syquest
- klausfrank
- Chuggy Microdrive
- Posts: 61
- Joined: Wed Jan 26, 2011 10:47 am
- Location: Silkeborg, Denmark
Re: Qubata Syquest
There must be a cartridge inside the drive for the software to recognize it as a hard disc.
- klausfrank
- Chuggy Microdrive
- Posts: 61
- Joined: Wed Jan 26, 2011 10:47 am
- Location: Silkeborg, Denmark
Re: Qubata Syquest
Yes, you are right, but I have put in a cartridge formatted and by the QubIDE - it should work - but it will not!
Re: Qubata Syquest
Only works on Qubide v2 ROM/GAL ?
(My Iomega Zip 100mb drive required upgrade from v1.56 to V2.02 EPROM with new V2 GALs)
(My Iomega Zip 100mb drive required upgrade from v1.56 to V2.02 EPROM with new V2 GALs)
David
Re: Qubata Syquest
Yes, Syquest requires use of the alternate status register, hardware support was added in V2 GALs.
-
- Font of All Knowledge
- Posts: 3976
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Qubata Syquest
Hi Nasta,Nasta wrote:Yes, Syquest requires use of the alternate status register, hardware support was added in V2 GALs.
Do you have the v2 GAL Code?
Regards,
Derek
Derek