firmware 1.19 version for Q Disc FDD controller.

Nagging hardware related question? Post here!
RWAP
RWAP Master
Posts: 2834
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

Re: firmware 1.19 version for Q Disc FDD controller.

Post by RWAP »

Hmm - Derek_Stewart then?


Derek_Stewart
Font of All Knowledge
Posts: 3928
Joined: Mon Dec 20, 2010 11:40 am
Location: Sunny Runcorn, Cheshire, UK

Re: firmware 1.19 version for Q Disc FDD controller.

Post by Derek_Stewart »

Hi Rich,

I have checked the ROM images for CST Q Disc image, but I do not have version 1.19.

Only CST QDisk v1.13 and v1.16

I will have another look at the eprom you sent me, but I think they will be just the same as the images files, on the QL Homepage.


Regards,

Derek
User avatar
schombi
Chuggy Microdrive
Posts: 63
Joined: Mon Sep 24, 2012 7:11 pm
Location: Germany

Re: firmware 1.19 version for Q Disc FDD controller.

Post by schombi »

I´m still trying to find out how the 0K version of this interface can be successfully equipped with RAM. Do I need a new ROM, PAL chip or both? If so, where to get them? Or does it need a wire link/jumper?


RWAP
RWAP Master
Posts: 2834
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

Re: firmware 1.19 version for Q Disc FDD controller.

Post by RWAP »

Derek_Stewart wrote:Hi Rich,

I have checked the ROM images for CST Q Disc image, but I do not have version 1.19.

Only CST QDisk v1.13 and v1.16

I will have another look at the eprom you sent me, but I think they will be just the same as the images files, on the QL Homepage.
I have just received a bundle of stuff, and amongst it is a CST Q-Disc interface with v1.18.

I will send this to Derek to read the EPROM image :)


Post Reply