Tetroid Disk Interface - FORMAT issue

Nagging hardware related question? Post here!
Silvester
Trump Card
Posts: 179
Joined: Thu Dec 12, 2013 10:14 am
Location: UK

Re: Tetroid Disk Interface - FORMAT issue

Postby Silvester » Thu Jan 11, 2018 2:16 pm

Silvester wrote:OK, that makes sense.

Err... should have qualified that, might have been seen as impolite :oops:
I wasn't sure if it was a hardware problem, that it was 2.17c made sense.

I've had a look and the associated MDV routines in 1.36 and 2.17 are identical. The RAM driver code is completely different, 2.17 looks like an early version of SMSQ/E level 2 RAM driver. Need to delve deeper into inner workings of 2.17 RAM driver.


Silvester
Trump Card
Posts: 179
Joined: Thu Dec 12, 2013 10:14 am
Location: UK

Re: Tetroid Disk Interface - FORMAT issue

Postby Silvester » Wed Jan 24, 2018 2:11 pm

Here's a fixed version of Trump card V2 ROM with working FORMAT RAMn_MDVn.

I've only tested it on my Trump card V1 hardware but it should be OK since the problem was with routine converting the MDV sector dump to RAM driver filing format (level 2).
Attachments
tc219.zip
(23.57 KiB) Downloaded 6 times


tetroid
Chuggy Microdrive
Posts: 68
Joined: Sun Dec 06, 2015 7:36 pm
Location: Novosibirsk, Russia

Re: Tetroid Disk Interface - FORMAT issue

Postby tetroid » Thu Jan 25, 2018 7:36 pm

Silvester wrote:Here's a fixed version of Trump card V2 ROM with working FORMAT RAMn_MDVn.

I've only tested it on my Trump card V1 hardware but it should be OK since the problem was with routine converting the MDV sector dump to RAM driver filing format (level 2).


Thank you very much, Silvester.



Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 1 guest