Ql Issue/Problem

Nagging hardware related question? Post here!
User avatar
Dave
SandySuperQDave
Posts: 2765
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: Ql Issue/Problem

Post by Dave »

Is /RAS noisy at pin 8 of the 8301? RAS and CAS only go from pins 8 and 10 of the 8301 to the 16 DRAM ICs and nowhere else, with nothing intervening either. Either the 8301 is outputting a noisy signal, or a RAM is doing something nasty with it.


Voyager
ROM Dongle
Posts: 7
Joined: Sun May 07, 2017 12:40 pm

Re: Ql Issue/Problem

Post by Voyager »

The noise is initially present at 8301 of the order of 50-80 milivolts, it turned out that the RAS pin was bent. Unfortunately, in the variant of connecting any data bus to minus I checked only with the connected RAS pin. It will be necessary to look.


Voyager
ROM Dongle
Posts: 7
Joined: Sun May 07, 2017 12:40 pm

Re: Ql Issue/Problem

Post by Voyager »

The fault was in the ULA 8301. After the next replace this chip computer to start up.


User avatar
Dave
SandySuperQDave
Posts: 2765
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: Ql Issue/Problem

Post by Dave »

YAY!


Post Reply