Hello!
I have found a Sinclair QL in my grandparents house, but it doesn't work . I have connected it to a TV, and I get the screen below. When I press the reset problem the screen becomes white. In the IRC chat they told me that it could be a memory related problem. What can I do?
Thank you!
Sinclar QL not working
Re: Sinclar QL not working
It looks like your PC may have a memory fault or logic fault related to memory.
Read this thread first: http://qlforum.co.uk/viewtopic.php?t=502
If you are still stuck or overwhelmed there are a few good people who you could send it to for repair.
Read this thread first: http://qlforum.co.uk/viewtopic.php?t=502
If you are still stuck or overwhelmed there are a few good people who you could send it to for repair.
Re: Sinclar QL not working
Thanks for therreply. I could only check that all the ram chips are getting 5V with a multimeter because have no scope and no Minerva rom. I think I will have to send it to someone. Do you know someone in Spain that does this things?
Or should I try to get a Minerva first?
Thx
Or should I try to get a Minerva first?
Thx
Re: Sinclar QL not working
There is a Spanish forum
http://foro.speccy.org/viewforum.php?f= ... a954f1f388
that has a nice QL section and lots of helpful and knowledgeable people. Maybe you try to look for some help there.
Tobias
http://foro.speccy.org/viewforum.php?f= ... a954f1f388
that has a nice QL section and lots of helpful and knowledgeable people. Maybe you try to look for some help there.
Tobias
ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO