Q68 compatible peripherals on other QL systems
Re: Q68 compatible peripherals on other QL systems
Exactly. Thanks for mentioning.
It was hard to decide whether or not to multiplex the QL NET signal with something else, but in the end I thought it is worth a dedicated pin.
It was hard to decide whether or not to multiplex the QL NET signal with something else, but in the end I thought it is worth a dedicated pin.
- Mr_Navigator
- QL Fanatic
- Posts: 782
- Joined: Mon Dec 13, 2010 11:17 pm
- Location: UK, Essex
- Contact:
Re: Q68 compatible peripherals on other QL systems
-----------------------------------------------------------------------------------
QLick here for the Back 2 the QL Blog http://backtotheql.blogspot.co.uk/
QLick here for the Back 2 the QL Blog http://backtotheql.blogspot.co.uk/
Re: Q68 compatible peripherals on other QL systems
Those were the times... Any special reason why you mention it in this thread?
-
- Font of All Knowledge
- Posts: 3973
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Q68 compatible peripherals on other QL systems
HI,
The ERG/68000 board is known to me, I did try and buy one in 1986, but the shipping the VU68K board to the UK was expensive. I like that fact the many that it ran CPM/68K.
This looks now like a QXL, OK you need a PC with ISA bus to run it. But he VU68K can not run a QL operating system.
The ERG/68000 board is known to me, I did try and buy one in 1986, but the shipping the VU68K board to the UK was expensive. I like that fact the many that it ran CPM/68K.
This looks now like a QXL, OK you need a PC with ISA bus to run it. But he VU68K can not run a QL operating system.
Regards,
Derek
Derek