As most of you will know, I already stock the rectangular solid rubber feet for the base of the rubber key ZX Spectrum, ZX81, ZX Power Supply and ZX Printer. Incidentally, these feet will also fit the bottom of the drop down legs on the Spectrum+
I was wondering about some of the round rubber feet - there are two types
a) Type with centre hole - these fit the Spectrum+ and the QL
b) Type with a Solid plug which fit the Spectrum +2, +2A, +2B and +3
I got a qick quote on these, but due to the costs of the mould (£390 for type A and £330 for type B), it would mean that the feet would have to be sold at £4 each to get any chance of a return on the investment (based on 400 of each type being made !)
Is there any interest in this - or maybe alternative markets too?
Replacement Rubber Feet
-
- RWAP Master
- Posts: 2839
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Replacement Rubber Feet
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: Replacement Rubber Feet
Heh, this is one of those jobs that's ideal for 3D printing with a rubber filament. When I was experimenting with ninjaflex for the ZX printer belts, I thought it would be ideal for feet.
However, there's such a wide range of rubber stick on feet that work just as well, it make me wonder if it's a worthwhile expense just to be authentic.
However, there's such a wide range of rubber stick on feet that work just as well, it make me wonder if it's a worthwhile expense just to be authentic.
- vanpeebles
- Commissario Pebbli
- Posts: 2821
- Joined: Sat Nov 20, 2010 7:13 pm
- Location: North East UK
Re: Replacement Rubber Feet
On some machines I've used those big felt pads that pound shops sell for ornaments
- XorA
- Site Admin
- Posts: 1366
- Joined: Thu Jun 02, 2011 11:31 am
- Location: Shotts, North Lanarkshire, Scotland, UK
Re: Replacement Rubber Feet
Almost all my +2/+2A/+3 machines are missing feet so I would want a few.