QL Monitor Lead

Nagging hardware related question? Post here!
Forum rules
Post Reply
RWAP
RWAP Master
Posts: 2839
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:
Contact RWAP

QL Monitor Lead

Post by RWAP »

Does anyone know what monitor had a 9 pin D socket connection on it for the RGB signal from the QL - see picture
013.JPG


Top
User avatar
tofro
Font of All Knowledge
Posts: 2702
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: QL Monitor Lead

Post by tofro »

Rich,

EGA monitors used to have 9-Pin D-Subs on them.

Tobias


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
Top
User avatar
chriskgnr
Bent Pin Expansion Port
Posts: 90
Joined: Wed Jan 09, 2013 12:26 pm
Location: Piraeus, Greece

Re: QL Monitor Lead

Post by chriskgnr »

or maybe a Commodore 1083s, like the one i use! :D


Top
RWAP
RWAP Master
Posts: 2839
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:
Contact RWAP

Re: QL Monitor Lead

Post by RWAP »

Ah right - I have only ever seen the DIN sockets and SCART like connectors

If anyone wants the lead feel free to give me a shout!


Top
Derek_Stewart
Font of All Knowledge
Posts: 3972
Joined: Mon Dec 20, 2010 11:40 am
Location: Sunny Runcorn, Cheshire, UK

Re: QL Monitor Lead

Post by Derek_Stewart »

Hi Rich,

I have a CM8833 MkII Monitor, which may this type of monitor lead.


Regards,

Derek
Top
User avatar
1024MAK
Super Gold Card
Posts: 592
Joined: Sun Dec 11, 2011 1:16 am
Location: Looking forward to summer in Somerset, UK...

Re: QL Monitor Lead

Post by 1024MAK »

There were some multi sync CRT monitors that also had 9 pin D connectors (for EGA and VGA modes).

Mark


:!: Standby alert :!:
“There are four lights!”
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Looking forward to summer in Somerset later in the year :)

QL, Falcon, Atari 520STFM, Atari 1040STE, more PC's than I care to count and an assortment of 8 bit micros (Sinclair and Acorn)(nearly forgot the Psion's)
Top
Derek_Stewart
Font of All Knowledge
Posts: 3972
Joined: Mon Dec 20, 2010 11:40 am
Location: Sunny Runcorn, Cheshire, UK

Re: QL Monitor Lead

Post by Derek_Stewart »

RWAP wrote:Does anyone know what monitor had a 9 pin D socket connection on it for the RGB signal from the QL - see picture
013.JPG
Hi Rich,

I have to make a QL monitor lead for my CM11342 aka CM833-II

According to the monitor manual, the 9 pin D connector on the rear of the monitor accepts Analog and TTL RGB.

Your lead maybe for this type of monitor.

I will construct the lead and report back.


Regards,

Derek
Top
Post Reply

Return to “Hardware”