UQLX serial

Discussion and advice about emulating the QL on other machines.
Post Reply
Silvester
Gold Card
Posts: 436
Joined: Thu Dec 12, 2013 10:14 am
Location: UK

UQLX serial

Post by Silvester »

Does anyone familiar enough with UQLX sources/Linux drivers know if it is possible to change the number of stop bits to 2 for device configured for SER?

The PL2303 chip I'm using for /dev/ttyUSB0 supports 2 stop bits (so does CH341). The setting works in Minicom.

Better still, add parameter to extended format: SERnpht_b (number/parity/handshake/translation/baud)

I have a device which only works at fixed 9600 baud with 2 stop bits (like QL outputs). It would be useful to control it from UQLX likewise.


David
Post Reply