How to test if the drive or the cartridge is broken !

Helpful tips and guides, also new users can ask for help here.
RWAP
RWAP Master
Posts: 2834
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

Re: How to test if the drive or the cartridge is broken !

Post by RWAP »

Just beware, there should be a small U shaped heatshield around the ULA on mdv1_ because it is too close to a capacitor on the main board..

mdv2_ also should have a small plastic washer around the back right screw to stop it from going through the QL case!


User avatar
Cristian
Aurora
Posts: 960
Joined: Mon Feb 16, 2015 1:40 pm
Location: Veneto

Re: How to test if the drive or the cartridge is broken !

Post by Cristian »

RWAP wrote:Just beware, there should be a small U shaped heatshield around the ULA on mdv1_ because it is too close to a capacitor on the main board..

mdv2_ also should have a small plastic washer around the back right screw to stop it from going through the QL case!
Thanks again. Also I fixed the mdv2_ issue: as you suggested, its flat connector (what a professional, reliable and robust one!) was not well plugged.


Post Reply