File tranfer to DiskOnModule

Helpful tips and guides, also new users can ask for help here.
Post Reply
Vally
ROM Dongle
Posts: 3
Joined: Wed May 10, 2017 9:55 pm

File tranfer to DiskOnModule

Post by Vally »

Hi
I was wondering if anyone would know how to transfer QL files to a DOM ( formated om the QL attached to the qubide) that is installed on a PC .
Neiter windows explorer nor the qlemulator see this DOM

Thanks
Vally


Derek_Stewart
Font of All Knowledge
Posts: 3929
Joined: Mon Dec 20, 2010 11:40 am
Location: Sunny Runcorn, Cheshire, UK

Re: File tranfer to DiskOnModule

Post by Derek_Stewart »

Vally wrote:Hi
I was wondering if anyone would know how to transfer QL files to a DOM ( formated om the QL attached to the qubide) that is installed on a PC .
Neiter windows explorer nor the qlemulator see this DOM

Thanks
Vally
Hi,

If you can connect the DOM to a PC running WIndows, you can use the "Habi" Image Editor to read/write the QubIDE partitions.

See message thread:

http://qlforum.co.uk/viewtopic.php?t=16 ... 129#p17129

The Image Editor works on all Qubide removal devices.

You will have to consider the loss of QDOS Executable Headers on Executable programmes, but using Jonathan Hudson's SFX UNZIP programme this should be no problem.


Regards,

Derek
Vally
ROM Dongle
Posts: 3
Joined: Wed May 10, 2017 9:55 pm

Re: File tranfer to DiskOnModule

Post by Vally »

Hi Derek
Will try that.
Thanks a lot
Vally


Post Reply