The Sinclair QL Forum

Blessed are the nay-sayers for the future is theirs! (Or is it?) In the mean time we wait for some test results from Derek. See where we go from there.. Sorry, a little delay, had some other problems to attend to. My house Electric circuit breakers kept on tripping. The fault was traced to Clothes ...

Hi,

If you can type AT and get OK back, the modem is connected to the computer correctly.

You can get information of the modem configuration and connections using the ATI command.

Type: ATIx where x = 0 to 3

i.e. AT0 or ATI1

The sparse manual says AT? gives list of the commands.

Hi,

Can you try switching off the local echo, with ATE0

Also try AT? for a list of the commands.

This is guesswork, as I do no have this modem.

Peter wrote : Curious if someone gets it to work on an up-to-date OSSC. Hi Peter, I bought an OSSC Kaico v1.6 scan doubler from Amazon for my Q60 during lockdown. Yes it was a bit pricey but I wasn't able to spend on much else, and if you think about the price of the scan doubler to what I paid for...

Hi,

There is a Sinclair QL Italy mailing list, all messages in Italian.

Thry this link to subscribe:
https://www.freelists.org/list/sinclair-italy

Hi,

Can you not make a image file and use MDI to load from QIMSI.

If the game is too large for a MDV image, then use FDI.

Hi,

You can set the Baud rate of the serial port to the maximum, using the S*Basic BAUD command, then set the Modem Baud Rate to the maximum the modem supports and can connect from the BBS.

The wiring diagram, detailed above works perfectly with SER2 and the Simulant WIFI Mode,, for SER1 an interchange of the contol lines is required.

I thought about having a switchable serial cable to switch between SER1/2, I have get a proto-type made.

A simple cable from QIMSI SER3 would also work.

I have an Amiga A500, with a PiSorm that just needs setting up, I can try it with QDOS Classic. That would be an important check. If possible, please try the qdos-gcc compiled Dhrystone benchmark on both EMU68 and Musashi. Hi, I have got qdos-gcc compiled on my Linux computer, so I can try compilin...

Hi,

I have an Amiga A500, with a PiSorm that just needs setting up, I can try it with QDOS Classic.

I am going to sell all the Amiga stuff on eBay, as I do not need them, I have a Amiga A600, but no PiStorm.