The Sinclair QL Forum

Hi,

I am in the process converting Derek Brewster's Velnors Lair adventure game from Spectrum Basic to Superbasic.

I had just got correct some bad programming in the gane.

I am not sure if this still copyright...

Hi,

I gave completed the formatting if Andy's book Assembley Language in the QL,.

Just needs proof read, if any one is interested?

Hi,

Does anyone know if QTYP 2 could be made freeware, as it is one of those must have pieces of software, can not be purchased anymore.

Hi Martin,

Thanks for the update.

I use FDI and MDI on the Q68,, I had not noticed any problems.

Hi,

Does it matter that the FOR loop index is not defined as an Integer?

Hi, It does not matter how old the software is, as long as you have setup the serial port in Windows in the device manager with the correct Baud Rate and configured the Windows terminal software, TeraTerm with the Windows COM port and baud rate, use Software Flow Control, connect the PC to the QL wi...

Hi, This old knowledge from the BBS days in the 1980s, I have forgotten most of it, but here is a little summary. I think there is an area of confusion here, when using modems, there are 2 serial speeds or Baud Rate to consider: 1. The Baud Rate from the Computer to the Modem I usually set the Q68 B...

Hi, As I mentioned earler, I bought 10 Intel D8749H IPCs, only 2 out of 10 were abled to be programmed with the ALL03A programmer with the Hetmes code, after erasing them in a UV Eraser. Here is one of the D8749H IPC in a Issue 7 QL: IMG_20220801_165017665.jpg I usually put a better label over the U...

I note there is a DIY Progammer: http://www.mattmillman.com/projects/hveprom-project/an-easy-to-build-mcs-48-8748-8749-8741-8742-8048-8049-programmer-reader/ Which,looks easy to build, I will get some PCBs made. A few PCBs available here : https://www.ebay.co.uk/itm/125415325819 I had some Blue PCB...

Thanks for showing me what it looks like. Was it hard to take the plastic cover off of those two boards? Not really, the cover was designed to sit on top of the circuit boards soldered to the main board. My cover comes off all the time. But just gently lever the plastic cover from one end: IMG_2022...